Manfrotto 014-14 Rapidadapter

Beskrivning

• Rapid Adapter 8.5 inches (W) to 1.4 inches (M)

• Length of threaded bolt: 18 mm

Datablad

försäljningsenhet: 1 Styck
Type: Tripod Sleeve
Diameter of bolt/flange socket bigger side: 16 mm flange socket
Diameter of bolt/flange socket smaller side: not existing
Thread bigger side: 1/4" male
Thread smaller side: not existing
försäljningsenhet: 1 Styck

Du kanske också gillar

Manfrotto 035 Super Clamp

19,38 €

Universal Clip

i lager

• For tubes or plates from 13 - 55 mm • Mounting: Hexagonal 5/8" socket and 1/4" and 2 x M5 threads (F) • TÜV and GS tested • Point load: 15 kg • Weight of the clamp: 0.41 kg

Gerband Tape 258 BK

10,45 €

Fabric Tape

i lager

• Colour: Black • Matte surface coating • Width: 50 mm x Length: 50 m • Ideal for sticking without leaving residue

Manfrotto 014MS Rapidadapter

8,84 €

Rapid Adapter

i lager

• Adapter sleeve of 5/8" to M10 threaded bolt • Colour: Black • Weight: 0.09 kg • Material: Aluminium

Roadworx TM-X VESA Mount

8 264,05 €

VESA Monitor Mount for Roadworx TM-X System

i lager

• For mounting on TM-X arms • Vesa standard mount: 75 x 75 mm and 100 x 100 mm • Max. load capacity: 10 kg • Weight: 0.56 kg

Manfrotto 244N Variable Friction Arm

105,45 €

Articulated Arm

i lager

• With variably adjustable friction • Lockable via a handscrew • Adapter: 16 mm with 1/4" female thread and 16 mm with 3/8" female thread • Max. load bearing capacity: 3.0 kg • Weight: 1.09 kg

Adam Hall 87221VR Rack Plate

4,64 €

Ventilation Panel

i lager

• With round ventilation holes • 1,5 mm Steel sheet • Dimensions: 1U • Colour: Black

Manfrotto 015 Adapter 1/4" - 3/8"

4,18 €

Screw Adapter

i lager

• Adapter from 1/4 external thread to 3/8 inch internal thread • Length: 2 cm • Weight: 10 g

Manfrotto 1004BAC 124-366cm BK

112,10 €

Aluminium Tripod

i lager

• Air damped aluminium stand with 4 sections • 3 Pull-outs (Ø 35, 30, 25, 20 mm) • Feet Ø: 22 mm • Min. height: 124 cm • Max. height: 366 cm • Transport length: 107 cm • Stand area: 106 cm • Max....

Adam Hall SS 017 Double ended Spigot

5,61 €

Double Ended Spigot

i lager

• Double-ended spigot for the universal clamp • One end with 3/8" thread for microphone clamps • Other end with 1/4" thread for cameras

Avenger D200B Grip Head 2 1/2'' Bk

32,30 €

Grip Head

i lager

• Top attachment: 16 mm (5/8") mount • Material: Aluminium • Dimensions (L x H x D): 18 x 6 x 9 cm • Weight: 0.55 kg • Colour: Black

Avenger E250 5/8" Baby Pin

5,61 €

Double Spigot

i lager

• 16 mm (5/8") • Without thread • Total length: 12.5 cm • Material: Galvanised steel • Weight: 0.15 kg

Avenger E200 Stand Adapter

21,75 €

Stand Adapter

i lager

• Adapts a 28 mm (1 1/8") spigot to a 16 mm (5/8") spigot • Ideal for Junior light stands, clamps and Junior roller bases • Material: Chrome-plated steel • Lower support: 28 mm (1 1/8") • Upper...

Avenger D200 Grip Head 2 1/2''

28,50 €

Grip Head

i lager

• Top attachment: 16 mm (5/8") mount • Dimensions (L x H x D): 18 x 6 x 9 cm • Weight: 0.55 kg • Material: Aluminium • Colour: Silver

Neutrik NC3 MXX

4,11 €

Professional XLR Male Connector

i lager

• Chuck type strain relief • Protective rubber sleeve • Solder contacts • Ergonomic design • Improved screening when plugging

Manfrotto 035+XMT Super Clamp Pack

24,70 €

Super Clamp Pack

i lager

• For pipes or plates from 13 - 55 mm • Attachment: hexagonal 5/8" socket and 1/4" and 2 x M5 threads (w) • TÜV and GS tested • Point load: 15 kg • Weight of the clip: 0.41 kg • Incl. XMT 002...

Manfrotto 196AB-2 Single Arm 2 Section

31,35 €

Two-part articulated arm

i lager

• With 16 mm studs • 1.5 kg load capacity when fully assembled • Extremely light construction - total weight is under 500 g • Max. overall length: 60.5 cm • Flexible positioning thanks to a total...

Manfrotto 119 Adapter

4,09 €

16 mm Adapter

i lager

• 3/8" inner thread

Manfrotto 013 Adapter Spigot

8,55 €

Adapter

i lager

• Adapter spigot with a 1/4" male and 3/8" male thread • Diameter: 16 mm (5/8") • Suitable for a wide range of tripods and mounts • Made of robust and light brass, hence not rusting

Manfrotto XMT,002 Adapter 5/8" M10 x 20

5,42 €

Mounting bolt for 5/8"

i lager

• With M10 x 20 mm thread • For 035 Super Clamp

Manfrotto 088 Adapter 3/8" - 1/4"

4,09 €

Screw Adapter

i lager

• To convert 3/8 outer thread to 1/4 inch inner thread

Manfrotto 037 Joining Stud

5,89 €

Joining Stud

i lager

• For Super Clamp • With 3/8" and 1/4" thread

Manfrotto 147 Adapter Spigot 3/8" - 1/4"

3,90 €

Short Adapter Spigot

i lager

• 3/8" +1/4"

Manfrotto 014-38 Rapidadapter

11,59 €

Adapter

i lager

• 16 mm sleeve with 3/8" thread • Stop: 3/8" screw • Mounting (top): 5/8" (inner) • Colour: Black • Weight: 0.09 kg • Material: Aluminium

Manfrotto 187 Adapter M10 M - 5/8'' Male

7,22 €

Adapter

i lager

• M10 M - 5/8'' • Male

Manfrotto 143BKT Camera Bracket

15,11 €

Camera Bracket

i lager

• Suitable for Manfrotto 143 and other tripods

Manfrotto 122B Backlite Pole Bk

29,45 €

Stand Pole

i lager

• Telescopic arm with 16 mm spigot to 5/8" on both ends • One end has a 1/4"male thread, the other end has a 3/8" male thread • Minimum height: 47 cm • Maximum height: 74.5 cm • Tube diameter: 22 /...

Manfrotto 042 Extension Arm

19,38 €

Extension arm for super clamp

i lager

• Incl. 035 spigot • Type 1 (5/8" / 16 mm threaded tip) + 013 stud • Colour: Black • Length: 19.5 cm • Material: Aluminium • Load: 8 kg • Weight: 0.21 kg

Manfrotto 026 Swivel Umbrella Adapter

31,35 €