Showgear Slide 3.0

Beskrivning

• Convenient accessories for quick and easy repeated mounting and dismounting of spotlights

• Consisting of two parts: one part is permanently connected to the device, the other part is attached to the mounting surface

• By pushing the part on the device into the holder, it snaps into place

• Maximum load capacity: 100 kg

• Separate rails available

• Material: Aluminium

• Dimensions (H x W x D): 31 x 83 x 71 mm

• Weight: 0.21 kg

• Colour: Black

Datablad

försäljningsenhet: 1 Styck
försäljningsenhet: 1 Styck
försäljningsenhet: försäljningsenhet

Du kanske också gillar

K&M 210/9 Black

49,50 €

Microphone Stand

i lager

• Similar to K&M 210/2 but with extension arm • Die-cast base • Foldable legs • Wide base • Height adjustable from 900 to 1600 mm • Extension arm length: 460 - 770 mm • Weight: 3.2 kg • Colour:...

Manfrotto 035 Super Clamp

16,47 €

Universal Clip

i lager

• For tubes or plates from 13 - 55 mm • Mounting: Hexagonal 5/8" socket and 1/4" and 2 x M5 threads (F) • TÜV and GS tested • Point load: 15 kg • Weight of the clamp: 0.41 kg

Gravity BG DBLS 331

35,10 €

Transport bag for 2 spacer bars

i lager

• Suitable for the spacer bars of Gravity LS 331 B and LS 431 B (not included) • 10 mm Padding • Padded partition • Double zipper • Material: Nylon • Dimensions: 1420 x 120 x 140 mm • Weight: 0.9 kg

K&M 259 Black

52,20 €

Microphone StandLow level microphone stand with telescopic boom arm for drums or special use.

i lager

• Also suitable for low settings • Height is adjustable from 425 to 645 mm • Die-cast base with folding legs • Comes with telescopic boom arm • Length of the boom arm: 470-775 mm • Colour: Black •...

Global Truss 5073-1B Selflock Hook Easy

18,54 €

Selflock Hook

i lager

• For tubing from 48 - 52 mm • Ideal for theatre, musical and stage applications • With M10 screws • Carrying capacity IAW BGVC1 125 kg • TÜV approved 250 kg • Colour: Black

Global Truss 812 Half Coupler

5,22 €

Coupler

i lager

• The "slim" truss coupler • Compatible with tubing Ø 48 - 51 mm • Width: 30 mm • Maximum tensile load: 100 kg • Maximum sheer load: 30 kg • Shutter: M8 with butterfly nut • Machine screw M10 with...

Global Truss 5003 Half Cone M10 F31-F44

7,47 €

Cone Connector

i lager

• For Global Truss F31 - F44 • Half conical with M10 thread • Thread depth: 15 mm • With pin and splint

Gravity SACC 35B Kabelklemmen

2,90 €

Cable Clips for Speaker Stands

i lager

• For 35-36 mm tubes • Cable channel width: 24 mm • Cable channel depth: 16 mm • Material: Plastic (ABS) • Height: 35 mm • Colour: Black • Shipping unit: 1 pair

Gravity LS 331 B

116,10 €

Light and Speaker Stand

i lager

• With square steel base • 35 mm Pole with M10 thread (female) • Height from 1420 - 2420 mm • Transport length: 1420 mm • Powder coated steel • Height adjustable by means of a screw with locking...

Gravity LS 431 B

133,20 €

Light and Speaker Stand

i lager

• With square steel base • 35 mm Tripod tube with M10 thread (female) • Height adjustable from 1420 mm to 2420 mm • Transport length: 1420 mm • Height adjustable by means of locking screw and...

Gravity BGSS 2 LB

37,80 €

Transport Case

i lager

• For 2 speaker stands • Long model • 15 mm padding • Material: Nylon • Double zipper • Dimensions: 1200 x 290 x 190 mm

Gravity BGSS 1 XLB

29,70 €

Carrying bag for 1 large speaker stand

i lager

• Material: Nylon • 10 mm Padding • Double zipper • Dimensions: 1490 x 170 x 150 mm • Colour: Black

Gravity BG WBLS 331

24,30 €

Travel Bag

i lager

• Material: 11680D Ballistic nylon • 5 mm Thick padding • Double zipper • Outer dimensions: 600 x 600 mm • Inner dimensions: 570 x 570 mm • Weight: 0.65 kg • Colour: Black

Gravity SF 36 M10 F Reduce Flange

11,61 €

Reduction Flange for 35 mm Speaker Stands

i lager

• 36 mm on M10 Internal thread • Threaded • Colour: Black

UDG Wolfmix W1 Hardcase

29,70 €

Hardcase

i lager

• Suitable for Wolfmix W1 • 600D Polyester with a 5 mm EVA Durashock padding • Water repellent • Accessory compartment • Carrying handle • "Easy Grip" zipper • Exterior dimensions (W x H x D): 229...

ADJ DMX terminal resistor Set 3Pin

4,10 €

DMX 3 pin Terminator / End Plug

i lager

• Set of 2 pieces • 110 Ω • Black metal version

Doughty T58400 Twenty Clamp BK

15,21 €

Aluminum Die Cast Clamp

i lager

• Load capacity: 20 kg • For pipes 48-51 mm • TÜV- Certified • Truss conserving due to extruded trigger • Both M10 and M12 screws can be used to fix the devices (M10 included) • Dimensions (W x H):...

Global Truss 5036-B Half Coupler

5,85 €

Black Half Coupler for F22 - F24

i lager

• For 32-35 mm tubing • Width: 30 mm • Maximum tensile load: 75 kg • Shutter: M8 butterfly nut • TÜV approved • Breaking force: 11.64 kN • Aluminium 6061 T6 • Tested according to DIN 4113-1:1980 +...

Duratruss BIG Jr. Clamp 100kg Black

4,49 €

Mounting bracket

i lager

• Suitable for trusses with 38 - 41 mm diameter • Material: Aluminium 6061 T6 • Screw: M10 x 30 • Maximum load/SWL: 100kg • Dimensions (W x H): 58.3 x 30.0 mm (without screw) • Weight: 0.133 kg •...

Adam Hall SS 017 Double ended Spigot

5,31 €

Double Ended Spigot

i lager

• Double-ended spigot for the universal clamp • One end with 3/8" thread for microphone clamps • Other end with 1/4" thread for cameras

Adam Hall Tent Clamp

26,10 €

Tent Clamp

i lager

• Tüv-tested • Easy installation of event equipment on tent beams • Suitable for all standard tent beams with 50 to 100 mm width • Uncomplicated adjustment of the mounting width with only one...

Duratruss Downrigger 50cm Black

33,30 €

Downrigger

i lager

• Compatible with 1 point trusses for hanging spotlights from a main truss • Allows to hang 2 smaller (movable) spotlights side by side or one large spotlight in the middle (with 1 or 2 suspension...

Neutrik NC3 FXX

3,90 €

Professional XLR Female Connector

i lager

• Collet strain relief • Cable strain relief • Solder contacts • Ergonomic design • Improved ground contact • Improved pin contact with a solder stop

Adam Hall 5621 Plain Nylon

1,69 €

Plastic Washer

i lager

• Flat design • Approximate inner diameter: 6.5 mm • Approximate outer diameter: 12 mm • Colour: Black • 20 Pieces per pack

Neutrik NC3 MXX

3,56 €

Professional XLR Male Connector

i lager

• Chuck type strain relief • Protective rubber sleeve • Solder contacts • Ergonomic design • Improved screening when plugging

Gerband Tape 258 White

9,90 €

Fabric Tape

i lager

• Matte surface coating • Width: 50 mm • Length: 50 m • Ideal for sticking without leaving residue • Colour: White

Neutrik NC3 MX

3,56 €

XLR Cable Connector

i lager

• Male • Silver housing • Black grommet

Manfrotto 035+XMT Super Clamp Pack

23,40 €

Super Clamp Pack

i lager

• For pipes or plates from 13 - 55 mm • Attachment: hexagonal 5/8" socket and 1/4" and 2 x M5 threads (w) • TÜV and GS tested • Point load: 15 kg • Weight of the clip: 0.41 kg • Incl. XMT 002...

Adam Hall 5651 Rack Nut Pack

5,76 €

Cage Nut

i lager

• For rack rails with square punching • M6 Thread • 20 Pieces per pack

Manfrotto XMT,002 Adapter 5/8" M10 x 20

5,40 €

Mounting bolt for 5/8"

i lager

• With M10 x 20 mm thread • For 035 Super Clamp

Adam Hall 5410BLK Rack Screw Pack

3,10 €

Rack Screw

i lager

• M6 x 16 mm • Colour: Black • 20 Pieces per pack

PureLink IQ-PC1000-100 Cat6A

9,90 €

Cat6A Patch Cable

i lager

• Length: 10.0 m • Up to 500 MHz for 10GBase-T Ethernet and HDBaseT • Gold-plated precision plug contacts • RJ45 plug to RJ45 plug • High purity copper strands • S/FTP shielding • Outer diameter:...

Showgear Separate Slide Part

7,29 €

Separate Slide

i lager

• For the Slide Clamp Black • Thread: M10 • Dimension (H x W x D): 21 x 32 x 49 mm • Weight: 41 g

K&M 24528 Speaker/Light Stand Adap

17,91 €

Speaker/Light Adapter

i lager

• Flange adapter with M10 thread • For tube diameter 36 mm

K&M 215

3,10 €

Thread Adapter

i lager

• 1/2" and 3/8" inner threads • 5/8" 27 pitch outer threads • Galvanised • Weight: 10g

Neutrik NE8 FF

17,01 €

Feed-Through Connector

i lager

• RJ45 • Colour: Black

K&M Cable Holder 20 10x

2,15 €

Set of Cable Holder Clips

i lager

• Suitable for 20 mm extension arm or extension tube of the most common K&M microphone stands • E.g. K&M model series 210, 260, 25x, 27x, as well as on the extension tube of various K&M...

K&M Cable Holder 15mm 10x

2,15 €

Set of Cable Holder Clips

i lager

• Suitable for 15 mm extension arm or extension tube of the most common K&M microphone stands • E.g. K&M model series 210, 260, 25x, 27x • Colour: Black • Quantity: 10 pieces

77,40 €

i lager

Manfrotto C152EJ 6'' End Vice Jaw Clamp

72,90 €

Jaw Clamp

i lager

• 6 Inch / 15 cm jaw opening • Equipped with a fixed jaw at the end of the threaded rod • Ideal for positioning in small spaces • 16 mm (5/8") baby pin for use with industry-standard fixtures •...

35,10 €

i lager

8,46 €

Coupler

i lager

• 812 Coupler in a slim design, with the possibility of simple suspension like a classic hook • Compatible: 48 - 51 mm tube • Width: 30 mm • Tensile load: 100 kg • Lock: M8 wing nut • Outlet: M10...

Eurolite SB-10 Soft Bag

20,97 €

Transport Bag for Lighting Equipment

i lager

• Handy transport bag with sufficient space for various lighting effects and accessories • Material: Nylon • High-quality craftsmanship • Water repellent • With divider • Exterior compartment • 2...

Sadowsky MetroExp21 Vintage JJ5 RM BK

981,00 €

5-String Electric Bass

i lager

• Body: Okoume • Bolt-on neck: Roasted maple • Fingerboard: Roasted maple • Fingerboard radius: 12" • Scale: 864 mm (34") • Nut width: 47.5 mm • Nut: Sadowsky Just-A-Nut III • 21 nickel silver...

Vostok Instruments Atlas

289,80 €

Eurorack Module

i lager

• 4-Channel Multimode Filter • Per channel: Controls for cut-off frequency and resonance, selectable characteristics (low-pass, band-pass, high-pass), audio input and output, two CV inputs • Audio...

Native Instruments Kontakt 8 Update

89,10 €