• Jazzmaster
• Sonido Jazzmaster de los años 60s
• Construcción Single Coil
• Imanes Alnico V
• Resistencia DC en puente de 8,6 kOhm
• Resistencia DC en cuello de 8,6 kOhm
• Cable de conexión...
• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Cable with 2.1 mm and 2.5 mm (red) angle coaxial connector and reversed polarity (center plus)
• Suitable for line 6 DL4 / MM4 digital modelling, eventide factor, some Electro-Harmonix pedals...
• Distributes a power supply connection to two pedals
• The white striped cable is ungrounded to avoid ground loops
• PSU connector 2.1mm coaxial
• Pedal connector: 2 x 2.1 mm coaxial
• Polarity:...
• Length: 10 cm
• For pedals with higher power requirements, you can use this voltage doubler adapter to combine two isolated multi power supply outputs
• Power supply: 2x straight 2.1mm coaxial
•...
• Power supply: 2.1 mm Coaxial plug (straight)
• Pedal connection: 3.5 mm mini jack plug (straight)
• Polarity: Standard (Tip Positive)
• The 3.5mm Mini-jack cable connection is compatible with...
• Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V
• Suitable for various Electro Harmonix...
• For mounting the Voodoo Lab Pedal Power ISO-5, Digital, 2 PLUS, 4X4, Pedal Power 3 and MONDO power supplies under the Pedaltrain pedalboards of the Classic, Nova and Terra series
• Made in the USA
• Professional travel pedal board - compact enough to easily store in the overhead compartment or under the front seat of an aeroplane
• With Voodoolab X4 power supply with 4 outputs 9V DC @ 500 mA...
• A compact solution for smaller pedal boards, rack drawers, or as an additional power supply for larger boards with five isolated, filtered and regulated outputs.
• Outputs 1 - 3: 9V DC @ 100 mA...
• For all battery powered (guitar) effect units
• Provides all Line6 Modeling and ToneCore, Boss Twin pedals and vintage effects pedals (center negative) with the necessary voltages
• 4x 9 / 12V...
• Compact multi power supply with 8 isolated outputs and 2 X-Link outputs
• Output 1-6: 9V DC @ 500 mA (individually isolated)
• Output 7: 9/12V DC @ 500 mA (individually isolated)
• Output 8:...
• For pedals with higher power requirements (mA)
• For combining two galvanically isolated multi power supply outputs
• Power supply connection: 2 x 2.1 mm coaxial plug
• Pedal connection: 2.5...
• Power supply connector: 2.1 mm coaxial plug (angle)
• Pedal connector: 3.5 mm mini jack (angle)
• Polarity: Standard (positive tip)
• The 3.5mm miniplug cable connection is compatible with older...
• Cable with two 2.1 mm angled coaxial connectors and reversed polarity (center plus)
• Suitable for some Fulltones, some Moogerfoogers, JangleBox and other pedals
• Power supply connection: 2.1 mm...
• Ultra-compact isolated power supply for effects with high power requirements
• Connections: Output 1-4: 9V DC @ 500 mA (total max.1000 mA)
• Included cables: 4 pieces from 5.5 2.1 mm Coaxial...
• Ultra-light, flat aluminium construction
• Power supply for standard battery effects and DSP effects with high current requirements
• 100 V - 240 V AC operation for international use
•...
• For pedals with higher performance requirements (mA) you can use a current doubling adapter to combine two isolated multi power supplies
• Power supply: 2 x 2.1 mm coaxial plug
• Pedal...
• Battery clip works with any effect of running on 9V battery including vintage pedals without power supply jacks
• Power supply connection: 2.1 mm Angle coaxial connector
• Pedal connection: 9V...
• Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V
• Suitable for various MXR Dunlop...
• Adds four isolated 9V DC outputs to compatible Voodoo Lab power supplies
• Very compact, isolated power supply for battery-powered DSP effects with high power requirements
• Powered by any Pedal...
• Lightweight high-current power supply for international voltages
• X-LINK expansion ports connect Pedal Power X4 and X8 units to add up to 16 isolated outputs
• 100V-240VAC operation for...
• 4 Isolated relay controls
• Separate jack monoboxes
• Multi-DIN connector for modern amplifiers
• Manages all the foot switch functions of the amplifiers
• Phantom powered via GCX or pedal...
• With Voodoo Lab Pedal Power 2 Plus power supply
• Power supply Outputs: 4 x 9 V DC @ 100 mA - 2x 9 V DC @ 250 mA - 2x 9 V DC @ 100 mA with SAG
• Material: Aluminium
• Dimensions (W x D): 457 x...