• 60s Jazzmaster Tone• Aged• Output: Medium• 2 Single coils• Fabric-wrapped connecting cable• DC resistance bridge: 8.6 kOhm• DC resistance neck: 8.6 kOhm• Magnet material: AlNiCo V• Made in USA
• Analogue signal path • 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA • Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label • Style: S (Small) • Developed in cooperation with Ed Sheeran and Lowden Guitars • Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously • 32 Audio tracks and 64 MIDI tracks • 32 Instrument and 32 auxiliary tracks • Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL • 150 mm jog wheel per deck • Vinyl feel with pressure detection • 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments • From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Stereo sampler module (24 bit / 48 kHz) • Buttons for play/record, bank, reverse and controls for pitch, sample selection, start position, length, each with CV input • 60 Banks with 10 samples...
• Two-channel function generator with VCA • Per channel: AD envelope with fader for rise and fall times (each with three selectable time ranges) • Level and offset control for envelope output...
• Desktop case made of aluminium • Width: 64 U • Installation depth for modules: 55 mm • M3 threaded holes • 6 Slots for modules • Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• Desktop case made of aluminium • Width: 32 U • Installation depth for modules: 33 mm • M3 threaded holes • 2 Slots for modules • Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200...
• Desktop case made of aluminium • Width: 34 U • Installation depth for modules: 55 mm • M3 threaded holes • 4 Slots for modules • Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• High-fidelity two-channel stereo sampler • Recording of stereo WAV files directly onto microSD card • Each channel can play one of max. 600 stereo files (max. 32 Bit / 96kHz) • Per channel:...
• Expander for 4ms Listen modules and WAV recorders • Two balanced inputs and outputs: 6.3 mm TRS • Connection via jumper cable • Passive construction - requires no power supply • Width: 4 TE •...
• Switch for gate/trigger mode, extended division up to /64, spread mode, auto reset, counting direction ascending or descending • Passive design (does not require power supply) • Width: 4U •...
• Desktop case made of aluminium • Width: 60 U • Installation depth for modules: 33 mm • M3 threaded holes • 2 Slots for modules • Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• Multitap delay with extended possibilities • Velocity-sensitive sensor for manual input of multitap delay patterns • Maximum 32 delay taps, each with its own delay time, amplitude/filter and...
• Generates gate and envelope signals from audio sources such as drums, percussion or microphones • Percussion interface offers sensitivity control, sustain control (gate length) and adjustable...
• Function generator with built-in VCA • AD envelope with fader for rise and fall times (each with three selectable time ranges) • Level control for envelope output (range: 0 V to +10 V) • Trigger...
• Two-channel function generator with VCA • Per channel: AD envelope with fader for rise and fall times (each with three selectable time ranges) • Level and offset controls for envelope output...
• 8-Channel step sequencer• Each channel can output either control voltage (range: -5V to +10V) or gate signals• The steps (scenes) can be played sequentially via clock signal or selected directly...
• 8-Channel macro controller and CV sequencer• Each channel can output either control voltage (range: -5V to +10V) or gate signals• The steps (scenes) can be played sequentially via trigger signal...
• Two-channel function generator• Envelope times are determined by the time interval between two trigger impulses or tap inputs (pings)• Ping times can be divided by a factor of 8 or multiplied by...
• Modulo multifunzione che calcola le emulazioni di singoli moduli, intere patch, sequencer, catene di effetti ecc.• Compatibile con il software gratuito VCV Rack• Contiene 160 moduli preinstallati...
• Synchronisable function generator and LFO• Envelope times are determined by the time interval between two trigger impulses or tap inputs (pings)• Ping times can be divided by a factor of 32 and...
• Desktop case made of aluminium • Width: 26 U • Installation depth for modules: 33 mm • M3 threaded holes • 2 Slots for modules • Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200...
• Shifting Inverting Signal Mingler • 4-Channel CV and audio tool for tasks such as scaling, inverting, mixing, splitting and DC offset • Per channel: signal input and output, bipolar scale control...
• Digital delay/looper (max. 24 bit / 48 kHz) • Up to 87s delay/loop time in mono, 43s in stereo • Trigger input and ping button for tap tempo and external synchronisation • Controls for time,...
• 4-Channel stereo mixer with headphone output • Channels 1 and 2: mono input, signal LED, panorama and level control • Channels 3 and 4: stereo input, signal LED and level control • Stereo...
• Playable 4x4 matrix with 16 VCAs • 4 Inputs and outputs • Suitable for CV and audio signals (frequency range: 0Hz - 20kHz) • Per VCA: CV input, illuminated mute button and gain control (-100dB to...
• Two 16-pin slots for flying bus boards or bus boards • Connectors for CV/gate bus • Two power supply connectors for connecting further Row Power modules or 4ms Pod Eurorack enclosures •...