Der Mann mit der Maschine Convertible Multiple

Handpan

Varastossa

• Key: D Kurd 13 (9+4) (440 Hz) • Tones: D3 / (F3 G3) A3 Bb3 C4 D4 E4 F4 G4 A4 (C5 D5) • Material: stainless steel • Handmade • Professionally tuned • Diameter: 58 cm • Weight: 5.85 kg • Colour:...

Befaco Knurlies M3

31,50 €

Eurorack Screw Set

Varastossa

• Can be mounted by hand, screwdriver or Allen key • Pre-mounted plastic washer prevents scratches on module front panels • M3 x 7 mm • Colour: Black • Package content: 100 Pieces

Behringer CP1A

61,20 €

Power supply module for Eurorack systems

Varastossa

• Control LEDs for +12 V, -12 V and +5 V. • Slots for 2 Flying Bus Boards with 7 slots each • Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V) • Width: 4 HP • Depth: 52mm • Includes external power...

Der Mann mit der Maschine M4 Motor Fader Unit

448,20 €

Eurorack Module

Varastossa

• Possible applications: output of control voltages, step sequencer, mixer for audio and CV signals, ADSR envelopes and much more • Several fader levels with different functions can be defined •...

Der Mann mit der Maschine X7 Expander

207,90 €

Eurorack Module

Varastossa

• Power consumption: 94 mA (+12 V) / 0mA (-12 V) • Width: 4 U • Depth: 23 mm • Incl. 6-pin ribbon cable for connection to Droid Master

Der Mann mit der Maschine P10 Controller

107,10 €

Eurorack Module

Varastossa

• Expands Droid Master (Art. 542913, not included) by 2 large and 8 small freely assignable knobs • Possible applications: Control of LFO frequency or envelope parameters, pitch of a sequence or...

Der Mann mit der Maschine S10 Controller

126,00 €

Eurorack Module

Varastossa

• Possible applications: Selecting presets, muting audio and CV signals, transposing sequences and much more. • Current consumption: 10mA (+12V) / 0mA (-12V) • Width: 5 HP • Depth: 25 mm

Der Mann mit der Maschine Long Cable 80cm

4,95 €

6-Pin Ribbon Cable

Varastossa

• Length: 80 cm • For connecting Droid Controller modules and CV bus

Der Mann mit der Maschine Long Cable 60cm

4,39 €

6-Pin Ribbon Cable

Varastossa

• Length: 60 cm • For connecting Droid Controller modules and CV bus

Der Mann mit der Maschine Long Cable 40cm

3,80 €

6-Pin Ribbon Cable

Varastossa

• Length: 40 cm • For connecting droid controller modules and CV bus

Doepfer A-180-2 Multiples

31,50 €

Passive Multi-Port Distributor

Varastossa

• 8x Interconnected jacks • Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board) • Width: 2HP

Doepfer A-180-2 Vintage Edition

35,10 €

Passive Multi-Connector

Varastossa

• Eight interconnected jacks can be split into 2 groups (solder bridge on the assembly side) • Width: 2 HP • Vintage edition with black front plate

Erica Synths Pico DSP

130,50 €

Stereo Effect Processor Module

Varastossa

• 8 Algorithms: Mono Delay, Pitch Shift Delay, Stereo Delay, Granular Delay, Reverb, Saturated Reverb, Leslie Speaker, Overdrive / Bitcrusher • 2 Parameters per effect can be edited • CV input for...

57,60 €

Eurorack Module

Varastossa

• Quad Active Multiple • Four-channel 1-to-3 multiple with active electronics for audio and CV signals • Current consumption: 10 mA (+12 V / 10 mA (-12 V) • Width: 4 HP • Depth: 25mm

Der Mann mit der Maschine TRS Tool

43,20 €

Eurorack Module

Varastossa

• 3 Different sections • Suitable for audio, CV and MIDI signals • Signal splitter from 3.5 mm TRS stereo jack to two 3.5 mm TS mono jacks • TRS 4-fold multiple • TRS A/B swapper (converts MIDI...

Der Mann mit der Maschine Droid Master 18

332,10 €