• Cardioid
• With screw jack
• Suitable for pocket transmitter db Technologies WM220, PU900 / 901/910/920
• Requires 5 V Phantom Power
• Incl. windscreen and clip
• Successor of the model VH 504
• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
BRÄNDIN
Luettelo tuotteista tuotemerkeittäin Pilgerstorfer
• Thickness: 2.5
• For mouthpieces: M4, G3, N1, ESM
• With less core, therefore ideal for the rather velvety tone of the German mouthpieces
• French cane
• Reed thickness (measured at the end): 3.2...
• Thickness: 1.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 14 mm
• Rear width: 13.5 mm
• Length: approx. 59 mm
• Pack of 10 reeds
• "Sarastro-Cut"
• Strength: 2.0
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 15 mm
• Rear width: 13.5 mm
• Length: approx. 74 mm
• Vamp length: approx. 36 mm
• With...
• Strength: 1.5
• For mouthpieces with mouthpiece tip 2-4
• French cane
• Reed thickness (measured at the end): 3.5 mm
• Front width: 15 mm
• Rear width: 12.5 mm
• Length: approx. 73 mm
• Suitable...
• "Sarastro-Cut"
• Strength: 4.0
• French cane
• Reed thickness (measured at the end): 34 mm
• Front width: 15 mm
• Rear width: 135 mm
• Length: approx. 74 mm
• Vamp length: approx. 36 mm
• With...
• "Sarastro-Cut"
• Strength: 3.5
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 15 mm
• Rear width: 13.5 mm
• Length: approx. 74 mm
• Vamp length: approx. 36 mm
• With...
• "Old Weber" Cut
• Strength: 3.5
• For mouthpieces: Gleichweit, maxton, ESM, Zinner, Viotto, Hammerschmidt and similar
• Morré cane
• Thickness of reed (measured at the end): 3.3 mm
• Front width:...
• Strength: 1.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.8 mm
• Front width: 19 mm
• Rear width: 17 mm
• Length: approx. 89 mm
• Package quantity: 5 Reeds
• Strength: 3.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.8 mm
• Front width: 19 mm
• Rear width: 17 mm
• Length: approx. 89 mm
• Package quantity: 5 Reeds
• Strength: 2.0
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.8 mm
• Front width: 19 mm
• Rear width: 17 mm
• Length: approx. 89 mm
• Package quantity: 5 Reeds
• Strength: 3.0
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 14 mm
• Rear width: 13.5 mm
• Length: approx. 59 mm
• Pack of 10 reeds
• Thickness: 3.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 14 mm
• Rear width: 13.5 mm
• Length: approx. 59 mm
• Pack of 10 reeds
• Thickness: 2.0
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 14 mm
• Rear width: 13.5 mm
• Length: approx. 59 mm
• Pack of 10 reeds
• Strength: 4.0
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 3.4 mm
• Front width: 16 mm
• Rear width: 13.5 mm
• Length: approx. 70 mm
• The "Alto" model is...
• Strength: 3.5
• For all common mouthpieces
• French cane
• Thickness of reed (measured at the end): 3.4 mm
• Front width: 16 mm
• Rear width: 13.5 mm
• Length: approx. 70 mm
• The model "Morré...
• Strength: 2.5
• For all mouthpieces
• French cane
• Reed thickness (measured at the end): 2.8 mm
• Front width: 12 mm
• Rear width: 10 mm
• Length: approx. 61 mm
• Ideal for French E flat alto...
• Strength: 3.5
• Suitable for all common mouthpieces
• Made from French cane
• Reed thickness (measured at the end): 3.4 mm
• Width at the front: 16 mm
• Width at the rear: 13.5 mm
• Approx....
• Strength: 2.5
• For all common mouthpieces
• French cane
• Thickness of reed (measured at the end): 3.4 mm
• Front width: 16 mm
• Rear width: 13.5 mm
• Length: approx. 70 mm
• The model "Morré...
• Strength: 2.0
• Suitable for all common mouthpieces
• Made from French cane
• Reed thickness (measured at the end): 3.4 mm
• Width at the front: 16 mm
• Width at the rear: 13.5 mm
• Approx....
• Strength: 1.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 4.0 mm
• Front width: 17.3 mm
• Rear width: 14.5 mm
• Length: Approximately 80 mm
• Outstanding...
• Strength: 4.0
• For all mouthpieces
• French cane
• Reed thickness (measured at the end): 4.0 mm
• Front width: 17.3 mm
• Rear width: 14.5 mm
• Length: approx. 80 mm
• Excellent tonal...
• Strength: 2.0
• For all mouthpieces
• French cane
• Reed thickness (measured at the end): 4.0 mm
• Front width: 17.3 mm
• Rear width: 14.5 mm
• Length: approx. 80 mm
• Excellent tonal...
• Strength: 3.5
• For all standard mouthpieces
• French cane
• Reed thickness (measured at the end): 4.0 mm
• Front width: 17.3 mm
• Rear width: 14.5 mm
• Length: Approximately 80 mm
• Outstanding...
• Thickness: 2.0
• For mouthpieces: M4, M5
• Especially suitable for short, wide Eb tips
• French cane
• Reed thickness (measured at the end): 3.8 mm
• Front width: 11 mm
• Rear width: 9 mm
•...
• Strength: 1.5
• Suitable for all common mouthpieces
• Made from French cane
• Reed thickness (measured at the end): 3.4 mm
• Width at the front: 16 mm
• Width at the rear: 13.5 mm
• Length:...
• Strength: 3.0
• For all common mouthpieces
• French cane
• Thickness of reed (measured at the end): 3.4 mm
• Front width: 16 mm
• Rear width: 13.5 mm
• Length: approx. 70 mm
• The model "Morré...
• Strength: 2.0
• For mouthpieces with mouthpiece tip 2-4
• French cane
• Reed thickness (measured at the end): 3.5 mm
• Front width: 15 mm
• Rear width: 12.5 mm
• Length: approx. 73 mm
• Suitable...