• Low-noise
• 8 Balanced XLR inputs
• Each to a direct output and a transformer isolated output
• Combine 2 channels to double or sum the outputs
• Ground lift per channel
• Suitable for...
• Nominal impedance 600 ohms
• Max. input +20 dB
• 19" / 1U
• On the front of each channel: 1 Input + 1 thru (for phantom power transmission), 2x isolated outputs
• 5 Year warranty
• 4 Channels
• Nominal impedance of the inputs / outputs: 200 Ohm
• Max. input: +6 dB
• Format: 19" / 1U
• On the front of each channel: One input, one parallel jack (output for looping phantom...
• 2 Inputs
• 8 Outputs
• 2 Audio signals to 4 separate zones or a single signal up to 8 possible
• XLR line inputs
• Level control and 5 segment LEDs per output
• Audio distribution
• Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated
• 2 x Inputs: XLR / f (one balanced input for...
• From eight symmetrical microphone signals (low impedance) -> 16 microphone signals (8 pairs)
• Direct output and a galvanic isolated output per transformer on each channel
• Transit of phantom...
• 2x 6 Stereo distribution amplifiers
• Monitor output per channel
• 6 Stereo XLR outputs
• 2 Stereo XLR inputs
• Input and output LED chains
• Each output can be routed separately as mono or...
• 4 In / 16 Out
• 4 Studio Grade Mic / Line Preamps
• 48V switchable
• Headphone output per input switchable
• For each channel 4 outputs (also 1 In / 16 Out or 1 In / 12 Out + 1 in / 4 Out or 2 In...
• 4 Inputs / 16 outputs
• 4 Studio Grade Mic / Line preamps
• Switchable: 48 V
• Headphone output switchable per each input
• 4 Outputs per each channel
• Can be configured as 1 In / 16 Out, 2 x 1...
• Balancing and impedance matching for guitar/bass/keyboard/synthesiser
• Eliminates ground loops thanks to galvanic isolation via transformer
• There are four independent DI boxes in a 19' housing...
• Splitter with 2 inputs
• Impedance control: 10 kOhm - 1 MOhm
• -8 dB pad on input 2
• 6 DI outputs
• Outputs 2 - 6 with Jensen transformers, each output on/off and additionally phase-rotatable...
Active 4-channel DI box/line isolation box in 19' rack format
In stock
• For connecting devices with unbalanced or balanced outputs to sound systems
• Eliminates ground loops thanks to galvanic isolation via transformer
• Inputs can be assigned with XLR or jack plug...
• 2 x 1 in 4/4 x 1 in 2
• 2 x 2 Identical sections, each with one balanced input to two balanced outputs (4 x 1 in 2)
• Front switchable from 2 x 1 in 2 to 1 in 4
• Rear inputs balanced via XLR
•...
• Radical Eclipse Transformer
• Connections: XLR inputs, D-Sub outputs, in addition, the inputs and outputs are available as "Phoenix" installation terminals
• Format: 19"/ 1U