Adam Hall 6206F Lid Location Female 10mm

Professional XLR Female Connector

In stock

• Collet strain relief • Cable strain relief • Solder contacts • Ergonomic design • Improved ground contact • Improved pin contact with a solder stop

Neutrik NC3 MXX

€3.56

Professional XLR Male Connector

In stock

• Chuck type strain relief • Protective rubber sleeve • Solder contacts • Ergonomic design • Improved screening when plugging

Adam Hall 17295TP Butterfly Latch medium

€5.76

Butterfly Latch

In stock

• Medium-sized design • With back pressure spring • Material: galvanized steel • Diameter of mounting holes: 5.1 mm • Built-in depth: only 9 mm • Weight: approx. 230 g

Adam Hall 34082 Sprung Handle medium

€4.86

Folding handle

In stock

• Sprung • 8 mm Deep recessed plate • Material: Galvanised steel • With reinforced mounting plate • Wide bracket with black PVC handle • Diameter of mounting holes: 5.1 mm • Weight: 360 g

Adam Hall 6103 Hybrid Lid Location 9,5mm

€4.00

Lid

In stock

• Aluminium Hybrid Lid Location for 9.5 mm Material • Outside thickness on both sides: 1.5 mm • Overall width: 12.5 mm

Adam Hall 6105 Case Angle 30 x 30 mm

€4.00

Aluminium Edge Protection

In stock

• Size: 30 x 30 mm • Weight: 240 g/m • Length: 1.00 m

Adam Hall 4907TP Rubber Foot 38x15mm

€2.20

Rubber Foot Pack

In stock

• 38 x 15 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall 4909 TP Rubberfeet Pack

€2.46

Rubber Foot Pack

In stock

• 38 x 20 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall 2524 Stop Hinge Large

€1.34

Lid Stay

In stock

• Extra heavy version • Material: 1 mm steel galvanized • Diameter of the fastener: 4 mm • Diameter of mounting holes: 4.6 mm • Weight: 80 g

Adam Hall 4906TP Rubberfoot set

€2.15

Rubber Foot Set

In stock

• 38 x 10 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall 6209 Case Angle 20 x 20 mm

€2.20

Aluminium Edge Protection

In stock

• Size: 20 x 20 mm • Length: 1.00 m / pc • Delivered in 1 m pieces +/ - 5 mm

Adam Hall 34482 Drop Handle

€3.10

Folding handle

In stock

• Sprung • Material: Galvanised steel • With reinforced mounting plate • Wide bracket with black PVC handle • Diameter of mounting holes: 5.1 mm • Weight: 270 g

Adam Hall 2251 Hinge large

€1.07

Hook Over Hinge

In stock

• Heavy version • Material: 2.2 mm steel • Galvanized • Diameter of mounting holes: 5 mm • Weight: 48 g

Adam Hall 17285 Butterfly

€6.21

V3 Butterfly-Latch

In stock

• In cranked dish • Medium sized • With "push-down" function • 9 mm deep • Material: Galvanised steel • Mounting holes: Ø 5.1 mm

Adam Hall 17373S TP Mini Butterfly

€6.21

Mini Butterfly Catch

In stock

• Mini version • Material: Galvanized steel • Sprung • Installation depth only 10 mm • Dimensions: 80 x 72 mm • Weight: 97 g

Adam Hall 4124 Ball Corner medium

€0.89

Ball Corner

In stock

• Three-legs • Cranked • For 30 mm edge protection • Material: 1.5 mm galvanized steel • Mounting holes: 5.1 mm • Weight: 61 g

Adam Hall 4111 Ball Corner small

€0.53

Three-leg Ball-Corner

In stock

• Small version • One hole per leg • Material: 1.2 mm galvanized steel • Leg length: 3 x 41 mm • Mounting holes: 4.2 mm • Weight: 34 g

Adam Hall 40431 Corner Brace 40 x 31

€0.36

L-Corner

In stock

• 1.2 mm galvanized steel • Mounting holes: 5.1 mm • Dimensions: 40 x 31 mm

Adam Hall 4101 Ball Corner large

€1.34