K&amp;M 19654

Structure Paint,

In stock

• Fast drying 1K aqueous paint with very good surface hardness • Black, semi matte • Weight: 1 kg

Adam Hall SM 700

€4.86

35 mm Mounting Flange For Loudspeakers

In stock

• Material: Steel • Height: 105 mm • Colour: Black

Neutrik NC3 FXX

€3.90

Professional XLR Female Connector

In stock

• Collet strain relief • Cable strain relief • Solder contacts • Ergonomic design • Improved ground contact • Improved pin contact with a solder stop

Neutrik NC3 MXX

€3.56

Professional XLR Male Connector

In stock

• Chuck type strain relief • Protective rubber sleeve • Solder contacts • Ergonomic design • Improved screening when plugging

Neutrik NL4 MP-ST

€4.77

SpeakON Mounting Socket

In stock

• 4-Pin • Screw terminals

Adam Hall 3402 Bar Handle

€6.21

Middle Bar Handle

In stock

• 1 mm steel • Black, powder-coated • Cut-out 170 x 112 mm • Diameter of the mounting holes: 5.6 mm • Weight: 550 g

Adam Hall 8708 Dish for D-Type Socket

€1.69

Dish for D-Type Socket

In stock

• For two universal XLR jacks or Neutrik Speaker Twist socket • Material thickness: 1 mm • Punched • Indent: 67 x 115 mm • Diameter of mounting holes: 5 mm • Weight: 100 g • Surface: Black...

Neutrik NL4 MPXX D-TYP

€2.10

Speaker Twist Mounting Socket

In stock

• 4 Pin • Fast-On connection

Adam Hall 4907TP Rubber Foot 38x15mm

€2.20

Rubber Foot Pack

In stock

• 38 x 15 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall 4906TP Rubberfoot set

€2.15

Rubber Foot Set

In stock

• 38 x 10 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall 4903TP Rubber Feet

€1.59

Rubber Foot Pack

In stock

• 20 x 9 mm Rubber foot with steel washer • Blister pack with 4 pieces

Adam Hall SM 720

€6.66

Mounting Flange For Loudspeakers

In stock

• M20 thread • Zinc die-cast flange • Diameter: 105 mm • Colour: Black

Adam Hall 87160 Dish D-Type Sockets blk

€4.86

Dish

In stock

• For 2 x Neutrik D-type, 2x uni. XLR or 4-pin Speaker Twist • Connected plugs are specially protected by the internally angled shell

K&M 24116

€8.37

Mounting Plate M20

In stock

• Zinc die-cast flange plate with M20 internal thread • For use with spacer rods • Diameter: 105 mm • Height: 25 mm • Bolt circle diameter: 80 mm • Weight: 0.24 kg • Colour: Black

K&M 19656

€9.09