• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Stereo sampler module (24 bit / 48 kHz)
• Buttons for play/record, bank, reverse and controls for pitch, sample selection, start position, length, each with CV input
• 60 Banks with 10 samples...
• Function generator with built-in VCA
• AD envelope with fader for rise and fall times (each with three selectable time ranges)
• Level control for envelope output (range: 0 V to +10 V)
• Trigger...
• Desktop case made of aluminium
• Width: 32 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200...
• Desktop case made of aluminium
• Width: 34 U
• Installation depth for modules: 55 mm
• M3 threaded holes
• 4 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• High-fidelity two-channel stereo sampler
• Recording of stereo WAV files directly onto microSD card
• Each channel can play one of max. 600 stereo files (max. 32 Bit / 96kHz)
• Per channel:...
• Expander for 4ms Listen modules and WAV recorders
• Two balanced inputs and outputs: 6.3 mm TRS
• Connection via jumper cable
• Passive construction - requires no power supply
• Width: 4 TE
•...
• Switch for gate/trigger mode, extended division up to /64, spread mode, auto reset, counting direction ascending or descending
• Passive design (does not require power supply)
• Width: 4U
•...
• Desktop case made of aluminium
• Width: 60 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• Two-channel function generator with VCA
• Per channel: AD envelope with fader for rise and fall times (each with three selectable time ranges)
• Level and offset control for envelope output...
• Multitap delay with extended possibilities
• Velocity-sensitive sensor for manual input of multitap delay patterns
• Maximum 32 delay taps, each with its own delay time, amplitude/filter and...
• Two-channel function generator with VCA
• Per channel: AD envelope with fader for rise and fall times (each with three selectable time ranges)
• Level and offset controls for envelope output...
• Desktop case made of aluminium
• Width: 26 U
• Installation depth for modules: 33 mm
• M3 threaded holes
• 2 Slots for modules
• Power supply specifications: 700 mA (+12 V) / 280 mA (-12 V) / 200...
• 8-Channel step sequencer
• Each channel can output either control voltage (range: -5V to +10V) or gate signals
• The steps (scenes) can be played sequentially via clock signal or selected...
• 8-Channel macro controller and CV sequencer
• Each channel can output either control voltage (range: -5V to +10V) or gate signals
• The steps (scenes) can be played sequentially via trigger...
• Two-channel function generator
• Envelope times are determined by the time interval between two trigger impulses or tap inputs (pings)
• Ping times can be divided by a factor of 8 or multiplied...
• Synchronisable function generator and LFO
• Envelope times are determined by the time interval between two trigger impulses or tap inputs (pings)
• Ping times can be divided by a factor of 32 and...
• Voltage controllable clock divider with 8 outputs
• Clock and reset input
• 8 Clock outputs with even and odd divider factors
• Rotate CV input (range 0V to +5V) shifts the different dividers at...
• Desktop case made of aluminium
• Width: 64 U
• Installation depth for modules: 55 mm
• M3 threaded holes
• 6 Slots for modules
• Power supply specifications: 1.4 A (+12 V) / 0.67 A (-12 V) / 1.0...
• Generates gate and envelope signals from audio sources such as drums, percussion or microphones
• Percussion interface offers sensitivity control, sustain control (gate length) and adjustable...
• Digital delay/looper (max. 24 bit / 48 kHz)
• Up to 87s delay/loop time in mono, 43s in stereo
• Trigger input and ping button for tap tempo and external synchronisation
• Controls for time,...
• Playable 4x4 matrix with 16 VCAs
• 4 Inputs and outputs
• Suitable for CV and audio signals (frequency range: 0Hz - 20kHz)
• Per VCA: CV input, illuminated mute button and gain control (-100dB to...