• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• German system
• Tip opening: 0.90 mm
• Facing length: 28.0 mm
• Made of stable high-performance polymer
• Ergonomic outer shape to relieve strain on lips
• New flow-optimised chamber shape...
• Viennese cut
• Peter Schmidl model
• Viennese bore (15.4 mm)
• Facing length: 32 mm
• Tip opening: 0,74 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Gerald Pachinger model
• Viennese bore (15,4 mm)
• Facing length: 34 mm
• Tip opening: 0.78 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Peter Schmidl model
• German-wide bore (15 mm)
• Facing length: 32 mm
• Tip opening: 0.74 mm
• For wooden reeds
• Recommended reeds: : Leuthner Standard and Professional (Viennese...
• Viennese cut
• Gregor Hinterreiter model
• Viennese bore (15.4 mm)
• Length of slide: 36 mm
• Tip opening: 0.87 mm
• For wooden reeds
• Recommended reeds: : Leuthner Standard and Professional...
• Viennese cut
• Andreas Schablas model
• Viennese bore (15,4 mm)
• Facing length: 34 mm
• Tip opening: 0.86 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Christoph Zimper model
• Viennese bore (15.4 mm)
• Facing length: 34 mm
• Tip opening: 0.85 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Alexander Neubauer model
• German-wide bore (15 mm)
• Facing length: 34 mm
• Tip opening: 1.0 mm
• For plastic reeds
• Recommended blades: Legere German Cut
• Viennese cut
• Matthias Schorn model
• Viennese bore (15.4 mm)
• Facing length: 34 mm
• Tip opening: 0.87 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• For French reeds
• German wide bore (15 mm)
• Facing length: 22 mm
• Tip opening: 1.15 mm
• For wooden reeds
• Recommended reeds: D'Addario, Leuthner french, Pilgerstorfer french, Vandoren V12
• Viennese cut
• Thomas Holzmann model
• German-wide bore (15 mm)
• Facing length: 33 mm
• Tip opening: 0.83 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Johann Hindler model
• Viennese bore (15,4 mm)
• Facing length: 34 mm
• Tip opening: 0.84 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Viennese cut
• Matthias Schorn model
• Viennese bore (15 mm)
• Facing length: 34 mm
• Tip opening: 0.87 mm
• For wooden reeds
• Recommended reeds: Leuthner Standard and Professional (Viennese...
• Marble version
• Tip opening. 1.08 mm
• Facing length: medium long
• Material: Rubber
• High consistency due to CNC milling
• European tuning: A = 442 Hz
• Warm, full and centred tone
• Very...
• Tip opening: 1.15 mm
• Facing length: 26.0 mm
• Made from high-performance polymer that maintains its form
• Ergonomic outer shape for relief of the lips
• New flow-optimised chamber shape...
• Tip opening: 1.05 mm
• Facing length: 21.00 mm
• Traditional design with standard blowing angle
• CNC milled facing
• Made from form stable high performance polymers in a pressure less casting...
• Tip opening: 1.20 mm
• Facing length: 21.00 mm
• Traditional design with standard blowing angle
• CNC milled facing
• Made from form stable high performance polymers in a pressure less casting...
• Tip opening: 1.95 mm
• Facing length: 31 mm
• Made from high-performance polymer that maintains its form
• Ergonomic outer shape for relief of the lips
• New flow-optimised chamber shape produces...
• Tip opening: 1.10 mm
• Facing length: 23.00 mm
• Traditional design with standard blowing angle
• CNC milled facing
• Made from form stable high performance polymers in a pressure less casting...
• Tip opening: 1.15 mm
• Facing length: 21.0 mm
• Made of stable high-performance polymer
• Ergonomic shape that relieve lips
• New flow optimised chamber design produces a full round sound
• Easy...
• Marble model
• Tip opening. 1.08 mm
• Facing length: medium long
• Material: Rubber
• High consistency due to CNC milling
• American tuning: A = 440 Hz
• Warm, full and centred tone
• Very...
• Boehm System
• Tip opening. 2.16 mm
• CNC-milled from the finest German hard rubber bar material
• Easy to play
• Hand-made and tested
• Very open, strong sound and large volume
• For French reeds
• Boehm wide bore (15 mm)
• Facing length: 26 mm
• Tip opening: 1.29 mm
• For wooden reeds
• Recommended reeds: D'Addario, Leuthner french, Pilgerstorfer french, Vandoren V12
• Tip opening: 0.761 mm
• Facing length: long (34.0 mm)
• Diameter: 15.4 mm
• Material: Plastic
• Characteristics: clear, full, extensive, virtuosic
• Direct and stable tone
• All-round mouthpiece...
• Viennese cut
• Alexander Neubauer model
• Viennese bore (15.4 mm)
• Facing length: 34 mm
• Tip opening: 1.0 mm
• For plastic reeds
• Recommended reeds: Legere German Cut