• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Contains 4 voltage controlled switches
• Each switch with buffered signal input and signal output and two gate inputs (positive and inverted)
• 6 Passive 4-way multiples
• Current consumption:...
• Subharmonic generator
• Separate sections for generating odd and even subharmonics
• 4 Controls per section for subharmonics, signal input and output
• Mix output with level control and odd/even...
• Multiple with 9 jacks that can be configured via jumpers to 3/3/3, 4/5 or 1x9
• The "CV bus" configuration allows two Convertible Multiples to be connected within a Eurorack system via a 6-pin...
• 8x Interconnected jacks
• Sockets are divided into 2x quadruple groups; but can also be modified to an eight-multiple (soldering bridge on the circuit board)
• Width: 2HP
• Buffered precision multiple
• 1-on-3 or 1-on-6 modes of operation
• +/-1 V offset switch per section e.g. for octave adjustment of oscillators
• Current consumption: 25 mA (+12 V) / 25 mA (-12...
• Buffered precision multiple
• Usable as 1-on-3 and 1-on-2 multiple
• Usable as 1-of-5 multiple when In B is not used
• Current consumption: 20 mA (+12 V) / 14 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm
• Output of the first multiple is normalised to the input of the second
• Width: 2 HP
• Depth: 39 mm
• Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
• Buffered precision multiple
• 1-on-3 or 1-on-6 multiple with active electronics for audio and CV signals
• Also distributes pitch CV to the cent
• Current requirement: 20 mA (+12 V / 20 mA (-12...
• Performance switcher and router
• 4 Inputs and outputs for audio and CV signals
• 3-Way toggle switch per channel (pushbutton / off / switch)
• Normalised inputs A-D
• Input A normalized to +5 V...
• Allows you to send a signal to multiple destinations, as well as to combine clock-, gate-, and pulse signals (Gate Combiner)
• Configurable as 3 x 3, 1 x 5, and 1 x 3 or 1 x 7 multiples
• Power...
• Patchbay module for organising signals between several Eurorack cases or between Eurorack system and DAW/mixing console.
• 8 Inputs and outputs
• Suitable for audio CV and gate/trigger signals
•...
• Quad Active Multiple
• Four-channel 1-to-3 multiple with active electronics for audio and CV signals
• Current consumption: 10 mA (+12 V / 10 mA (-12 V)
• Width: 4 HP
• Depth: 25mm
• Dual Passive Multiple
• Contains two independent adapters with three 3.5 mm mono jacks to two 6.3 mm mono jacks
• Passive construction - requires no power supply
• Width: 4 HP
• Depth: 28 mm
• Universal module for mixing, inverting, distributing and dividing control voltages and signals
• Two independent 1: 4 buffered multiples
• Two voltage transformers
• 4: 1 Summer
• Power...
• Twice 1 x 4 buffered multiplier module
• Output of the first multiple is normalized to the input of the second
• Width: 14 HP
• Depth: 29 mm
• Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
• Quad Passive Multiple
• Four-channel 1-to-3 or two-channel 1-to-6 multiple
• Passive design - does not require power supply
• Width: 4 HP
• Depth: 14 mm
• 6-Channel Clock Divider
• 6 Independent clock dividers (divided into section A & B) with adjustable divider factor per channel
• Clock multiplication for section A switchable
• Alternative...
• Selectable divisor and status LED for both channels
• Clock and reset inputs
• Divider output per channel
• Further configurations (chain, auto reset, trigger/gate) via jumpers on the rear side
•...
• Patchbay module for organising signals between several Eurorack systems or between Eurorack system and DAW/mixing console
• 8 Inputs and outputs
• Suitable for audio, CV and gate/trigger signals...
• Binary phase accumulator
• Component of the Leibniz subsystem - can be combined with Drezno, Jena, Odessa and Lipsk
• Works as clock and audio divider with 8 outputs, bidirectional binary...
• Digital 4-bit accumulator for generating gate signals, rhythm patterns and control voltages
• The binary CMOS shift register counts a value (0 - 15) adjustable via toggle switch for each pulse at...
• Digital 4-bit accumulator for generating gate signals, rhythm patterns and control voltages
• The binary CMOS shift register counts a value (0 - 15) adjustable via toggle switch for each pulse at...
• Link expander for Tubbutec 6equencer
• Can be used as configurable patchbay for other signals
• Passive design (does not require power supply)
• 4 Inputs and outputs
• Width: 2 TE
• Depth: 25 mm