• Analogue low-pass filter (24 dB/oct.) based on the SSI2144 filter module
• Control for filter frequency (range: 15 - 15,000 Hz) and resonance
• Two CV inputs for filter frequency (1 x 1 V/octave...
• 24 dB low pass 1 (VCF1)
• Voltage-controlled 24 dB low-pass filter
• Width: 8TE / 40.3 mm
• Depth: 65 mm (measured from the back of the front panel)
• Power Requirement: 30mA (12V) / -20mA (-12V)
• 6-Channel VCA and mixer
• 6 VCAs with linear response
• Per channel: Level control, CV input, signal input/output
• Signal input normalised to the next channel
• Mix output: Channel 6
• Suitable...
• Combination of low-pass filter (LP) and VCA
• Based on the idea of the Buchla module 292
• The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2...
• Voltage-controlled low-pass filter with an 18 dB / octave slope
• The circuit is based on a modified transistor ladder (Moog ladder), and corresponds to the low-pass filter of the TB303
• Width:...
• New filter module in which so-called opto FETs are used to control the filter frequency
• Dimensions (W x D): 40.3 mm (8 HP) x 65 mm
• Power requirement: 40 mA
• Eurorack module
• Voltage-controlled multi-mode filter with a slope of -12 dB / octave
• 4 filter outputs with different filter characteristics available at the same time: lowpass, bandpass,...