29,70 €
Structure Paint,
på lager
• Fast drying 1K aqueous paint with very good surface hardness
• Black, semi matte
• Weight: 1 kg
Bar Handle for Edge Mounting
Customer ratings and reviews
-
Fuld garanti forlænget op til 3 år
-
Gratis forsendelse til ordrer over € 29
-
30 dages pengene tilbage garanti
• Material: 1 mm Steel
• Powder coated
• Mounting holes Ø: 6 mm
• Weight: 695 g
• Colour: Black
Produkt information
- salgsenhed
- salgsenhed
Du vil eventuelt også synes om
4,86 €
35 mm Mounting Flange For Loudspeakers
på lager
• Material: Steel
• Height: 105 mm
• Colour: Black
17,91 €
Front Foam
på lager
• Sheet size (L x W): 2 x 1 m
• Thickness: 5 mm
• Permits free passage of air
• Material: Ester-based polyurethane
• Can be fixed with glue or other adhesive
• May be used for speaker grill...
4,77 €
SpeakON Mounting Socket
på lager
• 4-Pin
• Screw terminals
6,21 €
Middle Bar Handle
på lager
• 1 mm steel
• Black, powder-coated
• Cut-out 170 x 112 mm
• Diameter of the mounting holes: 5.6 mm
• Weight: 550 g
1,69 €
Dish for D-Type Socket
på lager
• For two universal XLR jacks or Neutrik Speaker Twist socket
• Material thickness: 1 mm
• Punched
• Indent: 67 x 115 mm
• Diameter of mounting holes: 5 mm
• Weight: 100 g
• Surface: Black...
2,10 €
Speaker Twist Mounting Socket
på lager
• 4 Pin
• Fast-On connection
4,86 €
Sprung folding handle
på lager
• In 8 mm deep recessed plate
• Steel is powder coated black with reinforced mounting plate
• Wide bracket with black PVC handle
• Mounting holes: 5.1 mm
• Weight: 360 g
2,20 €
Rubber Foot Pack
på lager
• 38 x 15 mm Rubber foot with steel washer
• Blister pack with 4 pieces
2,46 €
Rubber Foot Pack
på lager
• 38 x 20 mm Rubber foot with steel washer
• Blister pack with 4 pieces
5,76 €
Bar Handles
på lager
• Recessed plate (similar to Marshall)
• Design with a large bar handle
• Material: 1 mm Steel
• Powder-coated
• Cut-out: 236.5 x 118 mm
• Mounting holes: Ø 5.6 mm
• Weight: 580 g
• Colour: Black
2,15 €
Rubber Foot Set
på lager
• 38 x 10 mm Rubber foot with steel washer
• Blister pack with 4 pieces
0,45 €
Protection Corner
på lager
• Stackable
• Material: Plastic
• Inner radius: 6 mm
• Countersunk mounting holes: 3.5 mm
• Colour: Black
3,49 €
Rubber Foot Pack
på lager
• 38 x 25 mm Rubber foot with steel washer
• Hole size: 6.5 mm
• Blister pack with 4 pieces
4,86 €
Mounting Flange For Loudspeaker Cabinets
på lager
• Suitable for tube diameter: Ø 35 mm
• Material: Cast aluminium
• Height: 8 cm
• Colour: Black
4,86 €
Plastic Insert Handle
på lager
• Cutout 145 x 145 mm
• Diameter of the mounting holes: 5.5 mm
• Can be used to lift a box from all four directions
• Colour: Black
• Weight: 140 g
6,66 €
Mounting Flange For Loudspeakers
på lager
• M20 thread
• Zinc die-cast flange
• Diameter: 105 mm
• Colour: Black
0,98 €
Stackable Plastic Corner
på lager
• Inner radius: 10 mm
• Diameter of countersunk mounting holes: 3.5 mm
• Side length 83 x 56 x 22 mm
• Weight: 23 g
• Colour: Black
4,86 €
Dish
på lager
• For 2 x Neutrik D-type, 2x uni. XLR or 4-pin Speaker Twist
• Connected plugs are specially protected by the internally angled shell
1,07 €
Radius Corner
på lager
• With two legs
• Material: 1 mm steel
• Inner radius: 12 mm
• Mounting holes: 4.2 mm
• Weight: 17 g
• Colour: Black
8,37 €
Mounting Plate M20
på lager
• Zinc die-cast flange plate with M20 internal thread
• For use with spacer rods
• Diameter: 105 mm
• Height: 25 mm
• Bolt circle diameter: 80 mm
• Weight: 0.24 kg
• Colour: Black
2,20 €
Drive-In Nut
på lager
• Size: M6
• 20 Pieces per pack
• Installation depth: 10 mm
3,20 €
Chipboard Screws
på lager
• Flathead
• Size: 19 mm
• Package contains: 20 Pieces
• Colour: Black
4,48 €
Damping Material
på lager
• Damping for loudspeakers
• Made of hygienically harmless polyester wool
• With excellent damping properties
• Ready to be handled
• Package: 125 g / 2 mats
• Sufficient for a volume of 20 l
•...
6,21 €
Bar Handle
på lager
• Large model
• Recessed plate (as Marshall)
• Material: 1 mm steel
• Powder coated
• Dimensions: 274 x 162 mm
• Mounting holes: Ø 5.1 mm
• Weight: 529 g
• Colour: Black
1,69 €
Installation Tray
på lager
• Unpunched
• Material: 1 mm steel
• Cut-out: 67 x 115 mm
• Mounting holes diameter: 5 mm
• Weight: 108 g
• Surface: Black, powder-coated
9,81 €
Speaker Flange
på lager
• With variable inclination angle for loudspeakers
• The vertical angle can be adjusted in steps of 4.5 ° to +/- 13.5 °
• Fits on standard speaker stands
• Internal diameter: 36 mm
• Material:...