• Configuration: 6 Left
• Stepped / Staggered - 3 with long posts / 3 with short posts
• Suitable for most Stratocaster and Telecaster models from the USA and Mexico
• Longshaft: total axle length...
• Suitable for ST-style guitars
• SRO
• Modern maple neck with rosewood fingerboard and 22 jumbo frets
• Sanded, untreated and ready to play
• Neck mounting: bolt-on
• Material: Maple
•...
• ST-style
• Sanded and ready for lacquer
• Neck: Maple
• Fingerboard: Maple
• White dot fingerboard inlays
• Neck profile: modern - thickness at 1st fret: 21.3 mm / at 12th fret: 24.1 mm
• Scale:...
• T-Style
• Sanded, unfinished and ready for lacquering
• Neck: Maple
• Fingerboard: Rosewood
• White dot fingerboard inlays
• Neck thickness at 1st fret: 24.6 mm / at 12th fret: 25.4 mm
• Scale...
• T-Style
• One-piece
• Sanded, unfinished and ready for varnishing
• Material: Maple
• Fingerboard: Maple
• Black dot fingerboard inlays
• Neck profile: classic C - thickness at 1st fret:...
• Auto Grip System holder with improved foam rubber padding and elegant design
• "N.I.N.A." (Narrow Instrument Neck Adjustment, HA301) is specially designed to increase the strength of the AGS arms...
• Set consisting of belt pin, lock & lock wheel (one pair each)
• Silent function for noiseless operation
• One-piece belt button made of hardened steel (head 3 mm hex) with self-tapping wood...
• 24 Bit / 192 kHz
• 6-Core SHARC DSP for internal UAD real-time processing
• 2 Unison microphone preamps
• Auto Gain function
• +48 V phantom power
• Pad
• Low-cut
• Phase reverse
• Switch for...
• With flat frequency response
• Suitable for amp modelling pedals
• Equipped with: 2x 3" speakers for accurate emulation of guitar amps and cabinets
• Power: 30 W
• 6.35 mm Jack line level input...
• Neck: Maple
• Fingerboard: Maple
• Black dot fingerboard inlays
• Neck profile: Modern 'C' - neck stiffness at the 1st fret: 20.82 mm (.820'), at the 12th fret: 22.09 mm (.870')
• Fingerboard...
• Material: Maple
• Fingerboard: Maple
• Fretboard radius: 305 mm (12")
• Scale: 648 mm (25.5")
• Nut width: 43 mm (1.685")
• Synthetic bone nut
• Neck profile: Modern "C" - thickness at 1st fret:...
• Neck for Fender Made in Japan Hybrid II Telecaster
• Bolt-on neck: Maple with walnut stripes
• Neck finish: Urethane glossy
• Fingerboard: Rosewood
• Fingerboard inlays: White dot
• Fingerboard...
• Body: Alder
• Neck cut-out suitable for 4-bolt mounting
• Milling for 2 single coil pickups
• Without holes for pickguard mounting
• Opening for vintage-style bridge with 4-bolt mounting
•...
• Neck: Maple
• Fretboard: Maple
• Black dot fretboard inlays
• Neck profile: Modern C
• Fretboard radius: 241 mm (9.5")
• Nut width: 42 mm (1.650")
• Pre-slotted synthetic bone nut
• 22 Medium...