• Made of ebonite
• Tip Opening: 1.80 mm
• An excellent mouthpiece for experienced players looking for powerful volume, powerful tone and rich tonal variety
• V16 Series
• Tip opening: 2.65 mm
• Facing length: medium long
• Wide chamber: traditional 40s vintage sound
• Material: "Bell Metal Brass" alloy (bell bronze), 24K gold-plated
• Very open...
• Material: hard rubber
• Tip opening. 2.18 mm
• Enormous power and sharp sound
• Suitable for rock & roll, R&B and music styles that require a lot of dynamics and power
• Flat side walls...
• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
Empty housing for installation of Eurorack modules
Na skladě
• Size: 3U x 104 HP
• Integrated bus board with power supply + 12VDC @ 1.2A, -12VDC @ 1A, + 5VDC @ 1A
• Max. module depth over bus board: 5.08 cm
• Side mounted on / off switch and input for...
• Aluminium case and wooden side panels with Wenge Veneer
• 7 rows / 21 U
• Width: 197 U per row (1379 U total)
• Available installation depth for modules: 6 - 12.5 cm
• 14 bus boards with 14 slots...
ADDAC 901TA; Eurorack Case; Aluminium enclosure with sidings in 18mm Plywood with Wengue Veneer; 4 rows / 12U; width: 85 HP per row (340 HP in total); available depth for modules: 7.5 - 10cm; 4...
• Aluminium case and wooden sides with wenge veneer
• Carrying handle
• Integrated table stand
• Consists of 2 frames with 2 rows each (2x 6 U)
• Width: 85 U per row (340 U in total)
• Available...
• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External...
• Low Cost Case made of untreated wood
• 9 U / three module rows
• Width: 168 TE
• 2 Built-in A-100PSU3 power supplies: +12V/4000 mA, -12V/2400mA, +5V/8000mA
• Useful depth for modules: 110 mm (80...
• Compact empty housing for synthesizer modules and accessories in a 3 U format
• Sturdy aluminium frame with wooden side walls
• Width: 104 HP
• maximum depth: 38 mm (1.5")
• Easy positioning of...
• 28 Slots for Eurorack modules
• Power supply unit: +12 V / 3000 mA, -12 V / 3000 mA, +5 V / 1500 mA
• External dimensions (W x H x D): 312 x 165 x 546 mm
• Internal dimensions: 3x 104 HP width,...
• Colour: Stealth Black
• Connectors are located on the rear of the case
• 2x 6.3 mm Jack input
• 2x 6.3 mm Jack output
• MIDI input, output and thru connections
• USB port
• 28 Slots for...
• 2x 84 HP
• With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V
• Removable lid with carrying handle
• Steel ball corners
• Max. depth for modules in the front...
• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External...
• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External...
• Made of oak wood and finished with hardwax oil
• Constant Lab SeventyPWR power supply
• 2 Bus boards with 19 slots each for modules
• Aluminium rails with M3 threaded inserts
• Available...
• Made of oak wood and refined with brown linseed oil finish
• Constant Lab SeventyPWR power supply
• 2 Busboards with 19 slots each for modules
• Black aluminium rails with M3 threaded inserts
•...
• Made of oak wood and finished with hardwax oil
• Constant Lab SeventyPWR power supply
• 2 Bus boards with 19 slots each for modules
• Aluminium rails with M3 threaded inserts
• Bevelled shape...
• Made from oak wood and finished with hard wax oil
• Constant Lab HammerPWR power supply
• 4 Constant Lab Filtered busboards with 19 slots each for modules
• Aluminium rails with M3 threaded...
• Made from oak wood and finished with hard wax oil
• Constant Lab HammerPWR power supply (100 W)
• 4 Constant Lab Filtered busboards with 19 slots each for modules
• Aluminium rails with M3...
• Made of oak wood and finished with hardwax oil
• Constant Lab SeventyPWR power supply
• 2 Bus boards with 19 slots each for modules
• Black aluminium rails with M3 threaded inserts
• Bevelled...
• Untreated (no paint and/or lacquer) body constructed from "raw" wood
• External dimensions: approx. 445 x 275 x 160 mm
• Interior dimensions: approx. 2x 84 HP x 3 U
• Usable depth for A-100...
• 4 Connections for audio in / out modules: 6.3 mm TRS
• MIDI In/Out: USB A and 3.5 mm jack
• Three integrated active 1-to-4 multiple
• Two integrated 2-on-1 precision summers
• 24 Slots for...
• 2 Inputs: 6.3 mm TRS, balanced, with gain control of max. +20 dB and level meter
• 2 Integrated active 1-to-3 multiples
• Precision Adder with 2 CV inputs
• 2 Sum outputs and octave rotary...
• Suitable for use on table or installation in a 19" rack
• 84 HP width
• 52 M3 slide nuts
• Includes CP1A power supply module (4 HP) and flying bus board, power: 1 A (+12 V) / 1 A (-12 V) / 0.5 A...