• Made of ebonite
• Tip Opening: 1.80 mm
• An excellent mouthpiece for experienced players looking for powerful volume, powerful tone and rich tonal variety
• V16 Series
• Tip opening: 2.65 mm
• Facing length: medium long
• Wide chamber: traditional 40s vintage sound
• Material: "Bell Metal Brass" alloy (bell bronze), 24K gold-plated
• Very open...
• Material: hard rubber
• Tip opening. 2.18 mm
• Enormous power and sharp sound
• Suitable for rock & roll, R&B and music styles that require a lot of dynamics and power
• Flat side walls...
• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• For calibrating sound systems and measuring sound levels and frequency curves
• Polar pattern: Omnidirectional
• Frequency range: 20 - 20,000 Hz (-50 dB)
• Max. SPL: 122 dB
• Sensitivity: 15...
• Calibration system for stereo setups with Neumann KH 80 DSP and all analog (non-DSP-based) Neumann monitors in connection with the KH 750 DSP subwoofer
• Calibration algorithms developed together...
• For the calibration of sound systems and for the measurement of sound pressure levels and frequency curves
• Directional characteristic: omnidirectional
• Frequency range: 20-20,000 Hz...
• Also suitable for recordings and room sound analysis systems
• Directivity: Omnidirectional
• Frequency range: 20 - 20,000 Hz
• 3-Pin male XLR connector
• Phantom power
• Noise ratio: 70 dB
•...
• Polar pattern: Omnidirectional
• Operation via phantom power from +15 V to + 48 V
• Low-noise XLR output with gold-plated contacts
• Diameter: 12.7 mm
• Incl. storage box
• With 1/4" ball capsule
• Designed to use with Virtual StudioLive (VSL) or Smaart Analyzer Technology included
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: -37 dB / PA
• SPL: 132 dB
• Incl....
• Omnidirectional
• Free field
• Calibrated frequency response when used with ARC: 20-20,000 Hz +/- 0.5 dB
• Transformerless output
• Electronically balanced
• Impedance: 100 Ohm
• Signal-to-noise...
• Frequency range: 20 - 20,000 Hz
• Sensitivity at 1,000 Hz: 43dBV / Pa (7.1mV / Pa) ± 3dB
• Impedance: 800 Ohm
• 94 dB SPL
• 128 dB max
• Equivalent SPL: 22dB
• Signal to noise ratio: 72 dB
•...
• Polar pattern: Omnidirectional
• Frequency range: 10 - 20,000 Hz
• SPL: 126 dB max.
• Impedance: 500 Ohm
• 16-48 Volt phantom power required
• XLR connector
• Almost linear frequency response
•...
• Polar pattern: Omnidirectional
• Frequency response: 3 - 50,000 Hz
• Max. SPL: 140 dB
• Requires a +48 V phantom power
• Dimensions (length x diameter): 229 x 22 mm
• Weight: 225 g
• Incl. MC1...
• For XL2 systems
• Class 2
• Frequency range: 20 - 20,000 Hz
• Polar pattern: Omnidirectional
• Max. SPL: 146 dB
• Impedance: 100 Ohm balanced
• Phantom power: 48 V DC
• Length: 150 mm
• Diameter:...
• With omnidirectional characteristics according to IEC 60651
• Type II
• For ML1
• Calibrated
• Battery power
• For acoustic and sound level measurements
• Incl. Micro-clamp and certificate, case
• For calibrating sound systems and measuring sound levels and frequency curves
• Polar pattern: Omnidirectional
• Frequency range: 20 - 20,000 Hz
• max. SPL: 125 dB
• Sensitivity: -36 dBV / Pa (0...