• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Pedal for dynamic microphones and line signals
• Suitable as splitter
• Switchable GDN lift
• Connections: XLR in/ out
• Suitable as talkback for communication between musician and crew or to...
• From low to high impedance
• With 24 dB signal increase gain
• Can also be used in the reverse direction
• Balanced 3-pin XLR (f) to 6.3 mm jack plug
• -10 dB, -20 dB and -30 dB switchable
• Suitable for dynamic microphones and condenser microphones
• XLR in / out
• Frequency range: 22 - 20,000 Hz
• Dimensions: 21 x 113 mm
• Robust metal housing
• 2 Steel rods to raise the Wave Desktop Stand by 5 cm or 10 cm
• For microphones of the Elgato Wave series
• Screw on with stand and U-Frame
• Length: 58 mm each
• Weight: 26 g
• Black powder coating
• For the reduction of low-frequency microphone signals
• Also suitable for microphones with phantom powering
• Low cut: 100 Hz (12 dB/oct.)
• Output impedance 150 Ohm: Metal housing
• 3-pole XLR...
• For dynamic microphones and condenser microphones
• Can be used on both sides
• Metal housing
• 3-pole XLR input and output
• Dimensions: Ø 21 mm x 113 mm
• Weight: 44 g
• Mute button for corded microphones
• Switchable: Push To Talk or Push To Mute
• Reduction to approx. 60 dB
• Passes phantom power
• No popping on the outputs when switched on
• Switchable by hand...
• To block phantom power
• XLR 3-pole male to XLR 3-pole female
• Phantom power is blocked - audio signal remains intact
• Works in both directions
• Protects microphone preamps
• Microphones and...
• For Rode AHS1 headset
• PinMic and Lavalier microphones
• Fits the following products: Lectrosonics Transmitters SM Series, UMa Series, LMa Series and UM450