• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• A soft brush for dust removal, such as from synthesizers, mixing consoles and studio equipment
• Material: synthetic fibre bristles and a plastic handle
• Width: 10 cm
• 4 Channels with volume control and stereo/mono input
• Stereo output with peak LEDs
• Current consumption: 30 mA (+12 V) / 30 mA (-12 V)
• Width: 28 HP
• Depth: 28 mm
• Voltage controlled rise limiter
• Separate control for rise and fall time via fader and CV input
• Shape controller for setting the characteristic (linear to logarithmic)
• Power requirement: 10...
• Ttwo-channel bipolar attenuator for audio and CV signals
• Offset control with +/- 10 V control range
• Two-colour LED indicates signal polarity
• Can be used as DC source without input signal
•...
• Analogue mixer for audio and CV signals
• 4 Inputs with level control
• Normal mix output and inverted output
• Peak LED
• Power requirements: +14 mA (+12 V) / -11 mA (-12 V)
• Width: 5 HP
•...
• Multifunctional module for processing CV and audio signals
• Can be used as VCO, trigger generator, complex sample & hold stage, waveshaper, down-sampler, 8-step sequencer and more
• Internal...
• Dual four-quadrant multiplier
• Use as 4-channel mixer, ring modulator, voltage-controlled polariser, VCA, offset generator or adjustable voltage source
• Power requirements: +40 mA (+12 V) / -40...
• Programmable multifunctional module
• Based on the OWL platform from Rebel Technology
• Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface
• 4...
• Signal processor with bidirectional switch and gate generator
• Consists of the sections step controller, gate generator and analogue switch
• Muxlicer can be used as a voltage-controlled signal...
• Preamplifier for microphone, line and instrument signals
• +48 V Phantom power, switchable
• Impedance selector switch
• Envelope follower with adjustable attack and release time
• Gate and...
• Analogue voltage controlled oscillator
• Cleanly tuneable over a range of 10 octaves
• Rotary switch for octave selection and controls for tune and PWM
• CV inputs for pitch, FM, sync and PWM
•...
• Eurorack module
• Audio Interface
• 2x 6.3 mm Jack output - TRS balanced
• 6.3 mm Stereo jack headphone output with separate volume control
• Cue input
• Current consumption: 24 mA (+12 V) / 26...
• Analogue envelope generator
• Fader for attack, decay, sustain and release
• CV input to control each envelope stage
• Gate output for each envelope stage
• Characteristic can be adjusted from...
• Analogue kick drum module
• Adjustment possibilities for tune, waveshape (from sine to square), decay, bend and bend time
• Manual trigger button
• Trigger input
• Audio out
• CV inputs for tune,...
• Compact analogue thru-zero VCO with wavefolder and VCA
• VCO frequency control with range switch: Full, octave, semitone, LFO
• Octave selector switch
• Timbre control for wavefolder intensity...
• Input / output for X and Y axis with range and offset control
• Each axis can work as a bipolar attenuator or DC source
• 2 Gate outputs with trigger button
• Power requirement: 25 mA (+12 V) /...
• Precise voltage source for calibrating and transposing oscillators, sequencers and more
• OCT/VOLT rotary switch with 1V increments and selectable range (+/-5V or 0V to +10V)
• 12-Position rotary...
Befaco Pony VCF; Eurorack module; analog lowpass filter with 3-channel mixer and VCA; Mixer with 3 audio inputs, peak meter and normalised feedback-path on channel 3; lowpass filter with controls...
Befaco MIDI Thing V2; Eurorack module; configurable MIDI to CV converter; 12 outputs, each of which can be configured to provide Note-CV, Gate, Velocity, Channel Pressure, MIDI CC, Clock,...
• 4-Channel crossfader for audio and CV signals
• Per channel: two inputs with attenuators, crossfader CV input, crossfader signal LEDs, selector switch for CV/audio characteristic, crossfader...
• Expands Muxlicer by an additional track with 8 gate steps
• Three modes per step selectable: No Gates, All Gates (signal of the Muxlicer gate output) and Pass In (looping of the signal at the...
• Length: 1.5 m
• 3.5 mm TRS jack to 5-pin DIN plug
• Classification: TRS-MIDI Type A
• Compatible with devices from Akai, Korg, Make Noise, ADDAC, Critter & Guitari, Dreadbox, Intellijel,...
• Can be mounted by hand, screwdriver or Allen key
• Pre-mounted plastic washer prevents scratches on module front panels
• M2.5 x 7 mm
• Colour: Silver
• Package contents: 100 Pieces
• Can be mounted by hand, screwdriver or Allen key
• Pre-mounted plastic washer prevents scratches on module front panels
• M3 x 7 mm
• Colour: Black
• Package content: 100 Pieces
• Lunghezza: 1,5 m
• Jack stereo da 3,5 mm a connettore DIN a 5 poli
• Compatibile con i dispositivi di 1010Music, Arturia, Elektron, Erica Synths, Faderfox, Malekko, Polyend, Darkglass, ecc.
•...
• Multi-Effects-Processor with interchangable effects-cartridges (analog or digital) designed by renowned Eurorack manufacturers
• Two selectable operating modes and two adjustable parameters (X...