• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Made of very high quality
• Laser cut acrylic
• Consisting of a panel with a connector (Hinge) and an extension connector (H-channel)
• Each panel is 6.35 mm thick
• 300 mm high and each 600 mm wide
• Made of compressed fiberglass and encased in dark gray cloth
• The panel can also be mounted on the inside of the acrylic ClearSonic Shields to reduce the amount of reflected sound, or used as...
• Made of compressed fibreglass and encased in dark grey cloth
• The Sorber is mainly used as a centre piece for the ClearSonic cover system (LidPac)
• But can also be used as a sound absorber on...
• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic...
• Made of compressed fibreglass and encased in dark grey cloth
• This Sorber is mainly used as a side lid section for the ClearSonic lid system (LidPac)
• Panels are trapezium-shaped on one side
•...
• For live and studio applications
• Sound shielding from drum kits, amplifiers or instruments
• Easy handling by folding in "accordion-style"
• Made of high-quality, laser-cut acrylic
• Consists...
• Made of compressed fibreglass and encased in dark grey cloth
• The Sorber can also be mounted on the inside of the acrylic ClearSonic shields
• For reducing the amount of reflected sound, but can...
• The T-22 Base is used to secure ClearSonic Arcyl panels in place
• Each acrylic panel is inserted into the T-base from above
• The T-Base has a self-adhesive strip on the underside for fastening...
• Suitable for connecting old Clearsonic panels (built before March 2000) that do not have a groove for the connector and the Lite panel 2466 x 5
• Length: 1220 mm
• Sound and sound shielding of amplifiers or instruments
• Easy handling by folding in accordion style
• Essential for volume control on the stage and in the studio and clean mix
• Made of...
• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made from high quality laser-cut acrylic
•...
• Made of compressed fibreglass and encased in dark grey cloth
• The panel can also be mounted on the inside of the acrylic ClearSonic shields
• For reducing the amount of reflected sound, but can...
• For live and studio applications
• Noise and sound shielding of amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic
•...
• For live and studio
• Sound and sound shielding of drum kits, amplifiers or instruments
• Essential for volume control on the stage and in the studio and for a clean mix
• Easy handling by...
• Two-piece absorber panel made of compressed fiberglass and encased in dark gray cloth
• Both panels are joined together with a fabric tape and they are designed to extend the S5-2 baffles
•...
Transparent 3-Segment Panel for Live and Studio Applications
В наличност
• Noise and sound shielding for amplifiers or instruments
• Easy handling by folding in "accordion-style"
• Made of high-quality, laser-cut acrylic
• Consists of 3 panels with connectors (hinges)
•...
• For live and studio applications
• Sound shielding from drum kits, amplifiers or instruments
• Easy handling by folding in "accordion-style"
• Made of high-quality, laser-cut acrylic
• 3 Panels...
• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic...
• Panel for extending A2448 and A2466 panels
• Made of high-quality, laser-cut acrylic
• Consisting of 7 hinges and 7 H-channels
• Each panel is 6.35 mm thick, 450 mm high and 600 mm wide